Troubleshooting en Troubleshooting 14 Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
Fault Cause and troubleshooting The appliance is not cooling, the displays and lighting light up. Showroom mode is switched on. 1. Press and hold + for 9–11 seconds until an audible signal sounds. 2. After a short time, check whether your appliance is cooling. The LED lighting does not work. Different causes are possible. ▶ Call customer service. The customer service number can be found in the enclosed customer service directory. Side panels of the ap- pliance are warm. Not a fault. The side panels contain pipes which heat up during the cooling process. Units touching the ap- pliance will not be damaged by the heat. No action required.
The temperature dis- play flashes, a warn- ing signal sounds and Different causes are possible. ▶ Press . a The alarm is switched off. flashes red. The appliance door is open. ▶ Close the appliance door. Larger quantities of fresh food have been put in. ▶ Do not exceed the max. freezing capacity. → "Freezing capacity", Page 19 23