Chapter 7 Maintenance Exterior Surface Cleaning To be able to comfortably use the product at any time, clean the product following the method below. 1 Turn off the power. For details on how to turn off the power, see "Power Off" on page 25 . 2 Once the power lamp goes off, unplug the power plug from the outlet. 3 Use a soft cloth to wipe off dust and dirt. When the exterior surface is very dirty, soak a soft cloth in water that contains a small amount of mild detergent and after wringing the cloth thoroughly, wipe off the dirt with the cloth. When finished, wipe off the moisture with a dry, soft cloth.
Close the cover before wiping the product so that moisture does not get inside the product. If the interior of the product becomes wet, a short circuit may occur. Do not use volatile chemicals such as benzene, paint thinner, alcohol, etc. The surface or interior of the product may become distorted or deformed. Do not use a hard brush. It may scratch the surface of the product. 4 Plug the power plug into the outlet and turn on the power. 7 159