Chapter 1 Overview and Basic Operations Basic Operations This section describes the basic operation methods of the product that can be used by an operator and the general operations of the product. Power On/Off Power On 1 When the power is turned on, the power lamp will light up, Windows will start and a screen will be displayed, and the power of the printer will turn on. ❏ Press the power button. The printer can also be network booted from another PC that is connected via LAN. Power Off When the power is turned off, the printer's power off sequence will be executed, Windows will be shut down, and the power will turn off. ❏ Press the power button. ❏ Windows will be shut down.
To prevent operation errors, the button can be set so that it cannot be used to turn off the power. This can be set in [Start]-[Control Panel]-[Power Options]-[Advanced]-[Power buttons]. Do not turn off the power using the commercial circuit breaker. The printer's power off sequence will not be executed and the ink may become clogged. If the power is cut off due to an outage, etc., turn on/off the power of the product after the power is restored. 25