TM-C3400 Technical Reference Guide (EN)

Technical Reference Guide Product Overview Describes features and general specifications for the product. Setup Describes setup and installation of the product and peripherals. Application Development Information Describes how to control the printer and necessary information when you develop applications. Handling Describes how to handle the product. Maintenance of the TM-C3400 Describes to administrator for necessary information to administer TM-C3400 in the system such as distributing driver or installing new printer or replacing the printer. M00008312 Rev.M

Стр. 1

Cautions • No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corpo- ration. • The contents of this document are subject to change without notice. Please contact us for the latest information. • While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no respon- sibility for errors or omissions. • Neither is any liability assumed for damages resulting from the use of the information contained herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision is a registered trademark or trademark of Seiko Epson Corporation. Microsoft ® , Windows ® , Windows Vista ® , Windows Server ® , Visual Basic ® , Visual C++ ® , and Visual C# ® are registered trade- marks of Microsoft Corporation. All other trademarks are the property of their respective owners and used for identification purpose only.

Copyright The Ethernet model of this product includes software developed by the University of California, Berkeley, and its contributors. ©Seiko Epson Corporation 2009-2018. All rights reserved. 2

Стр. 2

Key to Symbols

For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid serious bodily injury. WARNING Provides information that must be observed to prevent damage to the equipment or loss of data. • Possibility of sustaining physical injuries. • Possibility of causing physical damage. • Possibility of causing information loss. CAUTION Provides information that must be observed to avoid damage to your equipment or a malfunction. Provides important information and useful tips. 3

Стр. 3

Warnings

Warnings • To avoid risk of electric shock, do not set up this product or handle cables during a thunderstorm • Be sure to use the power cable complied with safety standards with a PE (power earth) terminal on the plug, and make sure to ground the product before use. Ignoring this may result in severe shock. • Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. • Handle the power cable with care. Improper handling may lead to fire or electric shock. ∗ Do not modify or attempt to repair the cable. ∗ Do not place any heavy object on top of the cable. ∗ Avoid excessive bending, twisting, and pulling. ∗ Do not place the cable near heating equipment.

∗ Check that the plug is clean before plugging it in. ∗ Be sure to push the plug all the way in. • Be sure to use the specified AC adapter. Connection to an improper power source may cause fire or shock. • Do not place multiple loads on the power outlet. Overloading the outlet may lead to fire. • Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise . Continued use may lead to fire. Immediately unplug the equipment and contact qualified service personnel for advice. • Never attempt to repair this product yourself. Improper repair work can be dangerous. • Never disassemble or modify this product. Tampering with this product may result in injury or fire.

• Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. • If water or other liquid spills into this equipment, do not continue to use it. Continued use may lead to fire. Unplug the AC cable immediately and contact qualified service personnel for advice. • If you open the DIP switch cover, be sure to close the cover and tighten the screw after adjusting the DIP switch. Using this product with the cover open may cause fire or electric shock. WARNING 4

Стр. 4