/ : Lights / : Flashes : Off — : No change 20 LED Status Remedy Power Error Ink Paper — Paper size error Set specified papers. (See "Loading/Replacing the Paper" on page 37.) When the specified paper is not available, cancel the print job from the spooler. If no print job is in the spooler, turn off and on the printer to recover from the error. Paper path error Set DIP switch 3 setting to paper feeding method in the printer utility. (See "Setting the DIP Switches" on page 33) Paper jam error Remove the jammed paper. — Paper type error Set specified papers. (See "Loading/Replacing the Paper" on page 37.) — — Ink end Waste ink cartridge is full Replace the ink cartridge with a new one.
(See "Loading the Ink Cartridge" on page 30.) Ink cartridge is not loaded Ink cartridge is not loaded correctly Load the ink cartridge correctly. (See "Loading the Ink Cartridge" on page 30.) Ink cartridge cover is open Close the ink cartridge cover. — — Ink cartridge is low Waste ink cartridge is nearly full The time to replace the ink cartridge is close. Prepare a new ink cartridge. — — Paper empty Paper out error Set the papers. (See "Loading/ Replacing the Paper" on page 37.) Roll paper cover is open Close the roll paper cover. — — Paper removal error Remove the fanfold paper remaining. (See "Loading/ Replacing the Paper" on page 37)