EPSON — Loading the Ink Cartridge

Chapter 2 Setup Precautions on Handling When the ink cartridge is installed for the first time, the product uses ink to prepare for printing (ink charging). Ink charging takes approximately eight minutes. The ink cartridge contains 3 colors of ink. Even when one particular color is specified, all 3 colors of ink are used for printing and for keeping the print head in good condition. When the ink level of even one color comes to the lowest limit, the product stops printing. Do not touch the IC chip on the cartridge. Doing so may cause operating/printing malfunction. This product uses ink cartridges equipped with an IC chip that monitors the amount of ink used by each cartridge.

Cartridges are usable even if they are removed and reinstalled. However, if an ink cartridge in which little amount of ink remains is removed and reinstalled, it may not be usable. Some ink is consumed each time cartridges are installed because the product automatically checks their reliability. Since ink cartridges are designed to stop the operation before ink runs out completely to maintain the quality of the print head, some ink remains in the used ink cartridge. All the ink colors are consumed also for the maintenance operations when an ink cartridge is replaced and for print head cleaning.

Do not turn off the product or open the ink cartridge cover while charging ink (Power light is flashing). Opening the cover may cause the ink to be recharged, resulting in more ink being consumed. Also, it may cause printing malfunction. 2 Even for monochrome printing, all the ink colors are used in an operation designed to maintain the printing and print head quality. Do not disassemble the ink cartridge. Doing so may cause ink to adhere eyes and skin. Do not disassemble and remodel the ink cartridge. Doing so may cause printing malfunction. Use of an old ink cartridge may result in reduced print quality. Use it up within six months after opening the package.

The usage period for ink cartridges is printed on the packaging of individual ink cartridges. If ink contacts your skin, eyes, or mouth, take the following actions. -When it gets onto your skin, immediately wash the area with soap and water. • When ink gets into your eyes, immediately flush them with water. Leaving the ink as is may result in bloodshot eyes or mild inflammation. If something is wrong, immediately consult with a doctor. • When ink gets into your mouth, immediately spit it and consult with a doctor. There may be some ink around the ink supply port on the removed ink cartridge. Take care so that it does not stain the desk or other surface.

Do not remove the ink cartridge, except when you replace it. Do not open the ink cartridge package until you are ready to install it in the product. Open the ink cartridge cover, and wait at least 4 seconds until internal operations stop. If you take out the ink cartridge in less than 4 seconds, there is a risk that the ink may spurt out. Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it around too much or push the sides strongly. Do not allow foreign objects to fall into the cartridge installation section. Doing so may cause printing malfunction.

When ink is charged for the first time (right after purchase), ink is consumed for filling the print head nozzle (ink discharge holes) to get ready for printing. That is why the number of the printable sheets may be fewer than for the cartridges to be installed later. Dispose the ink cartridges properly following the law or regulations of your country and area. If you turn the power off the product using the power button, the print head is automatically capped, which prevents the ink from drying. After installing the ink cartridges, be sure to turn the power off using the power button when you are not using the product.

Do not pull out the power plug or trip the breaker while the power is on. Printing on water-repellent paper such as art paper, which is slow-drying, may cause print stains. Also, printing on glossy paper may cause finger prints on the paper or ink may adhere to your fingers when you touch it. Select paper not to case print stains before use. 31