Chapter 2 Setup 2. Setting for media detection This procedure is not required when media position detection is not changed. When paper remains in the printer, media position detection cannot be set. Be sure to remove the paper before turning on the printer. 1 Turn the power on. 2 Remove the paper in the printer. 3 Enter IP address of the printer to the address bar to the Web browser. Default setting: 192.168.192.168 Recommend the Mozilla Firefox web browser, If using the Windows Internet Explorer web browser, apply the latest security patch or Service Pack. 4 Enter ID and password to the login screen, login to the EpsonNet Config. 2 ID: epson Password:
epson 5 EpsonNet Config screen appears. Click [Printer Utility]. 6 Epson Printer Utility screen appears. Click [Printer Setting] - [1.Media detec- tion]. 7 “Media position detection” screen appears. Change Media position detection of the printer utility depending on the paper to use. Then, click [Send]. 41