4 Align the fanfold paper guide with the fanfold paper width. Lock the fanfold paper guide. 5. Loading the fanfold paper and turning on the printer 1 Turn the power on. 2 After the Power LED stops flashing and lights, insert the paper into the paper slot with the print surface facing upward until it is pulled into inside the printer (approximately 100 mm). The paper is automatically fed. When paper set operation at the paper cover close is set as “Madia Loading Method (with Cutting)” of [Utility]-[Printer Setting]-[Paper Set Operation Setting] on the printer utility, paper is automatically cut after the paper is fed. 56