Efficiently Setting up Multiple Printers This section describes the procedures for efficiently setting up multiple printers. The following software is required for the administrator's computer. • Printer driver • EPSON Deployment Tool Perform setup by following the procedures below. 1 Obtain the PrinterSetting settings file and network information such as the IP address if using a network computer. 2 Register the settings file and network settings in the Printer Deployment of the EPSON Deployment Tool. For registration procedures, refer to the user’s manual included with the EPSON Deployment Tool.
3 Connect the printer and select Settings from the EPSON Deployment Tool list, and then click Start Setup . Printer and network settings are completed automatically. Setting up of the printer is now complete. If setting up multiple printers, return to procedure 3 and perform the procedures again. For set-up procedures following these, refer to the user’s guide. 92