Follow the steps below to set whether to enable autocut after printing and paper feed settings. 1 Display the printer driver window. (See "How to Display the Printer Driver" on page 43 .) 2 On [General] tab, set [Settings For Paper Handling After Print]. 110 Settings For Paper Handling After Print Item Description Auto Cut After Every Page After printing, the paper is fed to the position where autocutting is possi- ble and is automatically cut on a page-by-page basis. When resumin g printing, the paper is fed in the reverse direction to the printing position and then printing resumes.
Only After Last Page After printing, the paper is fed to the position where autocutting is possi- ble and only the last page is automatically cut. When resuming printing , the paper is fed in the reverse direction to the printing position and the n printing resumes. After Specifie d Number Of Page Specify the cut interval. After printing, the paper is fed to the position where autocutting is possi- ble and is automatically cut at specified intervals. When resuming print- ing, the paper is fed in the reverse direction to the printing position an d then printing resumes.
No Auto Cut Feed To Peel Of f Position After printing, the paper is fed to the position where autocutting is possi- ble, and stops without performing autocutting. Paper cutting is possibl e with the CUT button. When resuming printing, the paper is fed in th e reverse direction to the printing position and then printing resumes. Feed To Cut Position After printing, the paper is fed to the position where peeling is possible , and stops. Paper cutting is possible with the CUT button. When resuming printing, the paper is fed in the reverse direction to the printing position and then printing resumes.