Setting procedure Follow the steps below to set the Media detection settings. 1 Remove the paper. • For roll paper: See step 1 in "Replacing Roll Paper with Fanfold Paper" on page 66 . • For fanfold paper: See steps1 to 2 in "Replacing Fanfold Paper with Roll Paper" on page 75 . 2 Turn the printer ON. 3 Display the printer driver window. (See "How to Display the Printer Driver" on page 43 .) 4 Select the [Printer Utilities] tab, and then click [Printer References] in [Printer Setting Util- ity]. 5 The TM-C3500 PrinterSetting screen is displayed. Select [Basic Settings] - [Media Set- tings]. 6 The "Media settings" screen is displayed. Set [Media detection settings]. Click [Apply Set- tings].
When fanfold paper is selected, the gap may not be detected depending on the paper you are using. If this happens, perform [Adjust the Label Gap Detection Sensor]. For details, see "Sensor Adjustment" on page 132 . 114