Chapter 3 Handling 3 139 Trouble Description Recovery method Image/ Illustra- tion Print quality for barcodes is poor The shutters on the platen on the outer side of the paper are set to open. When the shutters on the platen on the outer side of the paper are set to open, air current may cause printing trouble; outer edges of the print result may become blurry. Follow the instructions on the label on the top of the printer, and set the shutters on the platen. See "Shutter Adjustment" on page 40. No. 4 The paper you are using dif- fers from the paper set in the [Media Type]. Check the paper you are using and the [Media Type] settings.
For more information, see step 9 in "Replac- ing Roll Paper with Fanfold Paper" on page 66, or step 10 in "Replacing Fanfold Paper with Roll Paper" on page 75. - The resolution for the printer and print data do not match. If the resolution for the printer and print data do not match, barcodes may not be printed correctly. Match the resolution for the printer and print data. For TM-C3500, the resolution for print data is set to 360 dpi for all [Print Settings]. For more information on the barcode gen- erator application you are using, see the manual supplied with the application. -