Chapter 3 Handling Error Recovery Method The following table shows the error recovery methods. 3 147 LCD display Description Recovery method MEDIA FORM ERROR The type of the paper set in th e printer is different from the specifie d type set for "Media detection set- tings". • Set the type of paper specified for "Media detec- tion settings". • Change the settings for "Media detection set- tings" to that is suitable for the loaded paper. • For more information on the confirmation method and how to make settings for Medi a detection settings, see "Media detection settings" on page 113 MEDIA SIZE ERROR The paper size is inappropriate for th e print area.
• Set the paper whose size matches the print area. • Change the print area to that suitable for the loaded paper. PAPER JAM ERR ## ##:59 Roll paper is installed to the printe r set on fanfold paper. Set the type of paper specified for "Media source". Set the paper, "Replacing Roll Paper with Fanfol d Paper" on page 66 or "Replacing Fanfold Paper wit h Roll Paper" on page 75. PAPER JAM ERR ## ##:01 to 0E, 44, 55 to 5C, 80 The paper is jammed. Check the paper path for a paper jam. If jammed paper is found, remove it completely. Set the paper, "Replacing Roll Paper with Fanfol d Paper" on page 66 or "Replacing Fanfold Paper wit h Roll Paper" on page 75. PAPER JAM ERR ## ##:
81 Fanfold paper is loaded when th e media settings are set to roll paper. Load the paper that matches the media settings. For details on how to load paper, see "Replacing Roll Paper with Fanfold Paper" on page 66 or "Replacing Fanfold Paper with Roll Paper" on page 75. PAPER REMOVAL ER Fanfold paper is inserted when fan- fold paper still remains in the printer. Pull out the fanfold paper that remains in the paper exit. insert fanfold paper into the fanfold paper slo t at the back of the printer. PAPER OUT Paper is out. Set the paper, "Replacing Roll Paper with Fanfol d Paper" on page 66 or "Replacing Fanfold Paper wit h Roll Paper" on page 75. PAPER OUT ERROR Paper is out.
ROLL COVER OPEN The roll paper cover is open. Close the roll paper cover. INK COVER OPEN The ink cartridge cover is open. Close the ink cartridge cover. NO INK CARTRIDGE An ink cartridge is not loaded. Load an ink cartridge with sufficient ink left. See "Replacing the Ink Cartridge" on page 61. INK READ ERROR The ink cartridge information coul d not be read. • Remove the ink cartridge. Load the ink cartridge again. • If the error occurs again, replace the ink cartridge with a new one. See "Replacing the Ink Cartridge" on page 61.