Chapter 3 Handling How to Make Media Settings Depending on the paper you are using, the print result may be faint or white lines or black lines may be printed. Follow the steps below to make paper settings. 1 Load the paper and turn on the printer. 2 Display the printer driver window. (For details on how to display the printer driver window, see "Setting the Printer Driver" on page 49 .) 3 From the printer driver's [General] tab, select [Printing Settings] - [Media Type] to select the recommended setting. Contact your dealer for the recommended settings.
When the recommended value for [BkCMY (Ink Profile)] and [Bk (Ink Profile)] is not 0, make settings in [Ink Profile/Brightness Adjustment] on the printer driver's [Advanced] screen. For details, see "Banding Reduction" on page 49 . 3 4 Open the [Printer Utilities] tab, and then click [Printer Setting Utility]. 5 Click [Printer Adjustment] - [Print Head Alignment] - [Bi-direction Printing Adjustment] - [Start Adjustment] to adjust the paper feeding amount. For details, see "Print Head Alignment" on page 133 . 167