Chapter 6 Appendix Paper Specifications The following is the type and the size of paper specified for this printer. • When using paper other than the specified, users must evaluate the recognition rate in advance to avoid deterioration of the paper feed accuracy/barcode recognition rate/print quality and frequent occurrence of paper jams. • Depending on the temperature and humidity, the synthetic labels and paper backing have different ratios of expansion and contraction, and this causes the paper to curl. If the paper curls, the paper may be rubbed by the print head and become contaminated, or the paper may jam. • Do not use the paper which is extended by connecting with tape and others.
The paper may be detected incorrectly by the connected line, and rubbed by the print head and become contaminated, or the paper may jam.
6 195 Paper type Category Form Width Continuous paper Plain Matte Roll paper 30 to 108 mm {1.18 to 4.25"} (Paper width) Continuous paper (Blackmark) Plain Matte Roll paper 30 to 108 mm {1.18 to 4.25"} (Paper width) Continuous paper (Blackmark) Plain Matte Fanfold paper 50 to 108 mm {1.97 to 4.25"} (Paper width) Full-page label Transparent full-page label Plain label Matte label Synthetic label Glossy label Roll paper 25.4 to 108 mm {1 to 4.25"} (Label width) Die-cut label (Gap) Transparent die-cut label Plain label Matte label Synthetic label Glossy label Roll paper 25.4 to 108 mm {1 to 4.25"} (Label width) Die-cut label (Blackmark) Plain label Matte label Glossy label Roll paper 25.4 to 108 mm {1 to 4.25"} (Label width) Die-cut label (Blackmark) Plain label Matte label Fanfold paper 46 to 108 mm {1.81 to 4.25"} (Label width) Wristband Wristband Roll paper 30 mm {1.18"} (Paper width)