Chapter 6 Appendix Full-page label Backing paper width Backing paper Label area Edge cutoff Edge cutoff 6 199 Media type Plain label / Matte label / Synthetic label / Glossy label Media source Roll paper Backing paper width 30 to 112 mm {1.18 to 4.41"} Label width 25.4 to 108 mm {1 to 4.25"} Right and left outer edges 2 mm ± 0.5 mm {0.079 ± 0.02"} Paper thickness Plain label / Matte label / Synthetic label: 0.129 to 0.195 mm {0.005 to 0.008"} Glossy label: 0.184 mm {0.007"} Paper core Plan label / Matte label / Synthetic label: External diameter: 44.1 mm {1.74"} or more Glossy label: External diameter:
56.8 mm {2.24"} or more External diameter Maximum 101.6 mm {4"} Winding direction Printing face must be facing outside. • Do not use the paper with a hole or cutout. • To prevent glue from sticking to the roll paper supply unit, use label paper whose outer edges are removed only on the right and left.