Die-cut label (Blackmark) / Roll paper When "Borderless Printing" is disabled Top, bottom, left, right margins: 1.5 mm (Typical value) 0.5 to 1.0 mm 1.5 mm Paper width 1.5 mm Paper feeding direction Center of paper width Auto-cut position Perforated line 1.5 mm 15.0 mm or more*2 18.0 mm or more*3 Auto-cut position *1 When auto cut is not performed: 5.0 mm or more *2 When auto cut is not performed: 8.0 mm or more *3 When auto cut is not performed: 11.0 mm or more Auto-cut position Print area Backing paper Black mark position Label area 2.0 mm Edge cutoff 2.0 mm 216 12.0 mm or more*1 Print area width 2.0 mm Edge cutoff 2.0 mm