Chapter 6 Appendix When “Borderless Printing“ is enabled Top, bottom, left. right margins: 0 mm (Typical value) Paper width Recommended print area for text and Autocutting position 6 • Do not print inside or within 2 mm {0.08"} around the snap button mounting hole to prevent damage to the mechanical functions. • If using the WB-S/M/L series, use the attachment (OT-WA34). • If you enabled "Borderless Printing”, printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the label. To make sure printing does not protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data.
225 36 mm Paper feeding direction Center of paper mm 10.8 5.5 mm Autocut 183.0 mm 71.0 mm 38.1 mm 15.0 mm 265.0 mm 158.4 mm 28.0 mm 24.0 mm Auto Print area mm Paper