Chapter 3 Handling Handling This chapter describes basic handling of the printer. Replacing the Ink Cartridge When any of the four color ink cartridges is expended, the INK LED lights. Follow the steps below to replace the ink cartridge. 1 Turn the power on and make sure that the INK LED lights. 2 Pull down the ink cartridge cover to the front to open it. Open the ink cartridge cover, and wait at least 4 seconds until internal operations stop. If you take out the ink cartridge in less than 4 seconds, there is a risk that the ink may spurt out.
3 3 If there is a used ink cartridge that requires replacement, slowly push the ink cartridge, check that the lock is released, and pull the ink cartridge out towards you. 4 Shake new ink cartridge package 4 or 5 times before opening it and take out the ink car- tridge from the package. Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it around too much or push the sides strongly. 61