Chapter 2 Setup 7 When the installation finishes, the following screen is displayed. Click [ OK ] to close the screen. The installation of the printer driver is completed. For Ethernet Interface Model Before installing the printer driver, set an IP address to the printer, and add a TCP/IP port. (See "Setting the Printer IP Address" on page 45 and "Adding a TCP/IP Port" on page 46 .) The printer driver for the Ethernet interface model cannot be installed with a USB inter- face model printer connected. In this case, turn off the USB interface model printer before installing the printer driver for the Ethernet interface model.
Make sure the Ethernet cable is connected to the printer, and the printer is turned on. 2 Follow the steps below to install the printer driver. 1 For a 32bit OS, double-click the icon “c61d32_xxxx.exe.” For a 64bit OS, double-click the icon “c61d64_xxxx.exe.” 2 If the “User Account Control” screen is displayed, click [ OK ]. 3 Select [ EPSON TM-C610 ], and click [ OK ]. 51