For Ethernet Interface Model Before installing the printer driver, set an IP address to the printer, and add a TCP/IP port. (See "Setting the Printer IP Address" on page 45 and "Adding a TCP/IP Port" on page 46 .) The printer driver for the Ethernet interface model cannot be installed with a USB interface model printer connected. In this case, turn off the USB interface model printer before install- ing the printer driver for the Ethernet interface model. Make sure the Ethernet cable is connected to the printer, and the printer is turned on. Follow the steps below to install the printer driver.
1 For a 32bit OS, double-click the icon “c71d32_xxxx.exe.” For a 64bit OS, double-click the icon “c71d64_xxxx.exe.” 2 If the “User Account Control” screen is displayed, click [ OK ]. 3 Select [ EPSON TM-C710 ], and click [ OK ]. 4 Complete the installation by following the instructions displayed. To display the printer driver, follow the steps below. 1. Click [Start] - [Control Panel] - [Printer] (or [Printers or Faxes]). 2. Right-click on [EPSON TM-C710] and click [Printing Preferences]. For details on how to use the printer driver, see the printer driver help or "How to Use the Printer Driver" on page 61 . 50