• Rotation Settings: Select a setting when printing the barcode rotated by the specified rate. • Hexadecimal Entry Mode: Turn on the check box when the data for barcode is specified on Hexadecimal Entry Mode. • Composite: Turn on the check box to print barcode with a composite symbol. Separate the data specified to a composite symbol and a barcode with “\ |” or “| \”. Describe the data in the order of the composite symbol and the barcode. Example: 1234567890\ |012345678905 • Use a Quiet Zone: Leaves a blank margin on the right and left side of barcodes for bet- ter readability. The barcode printing position is moved based on the amount of the margin. • Module:
Sets the thin element width in dots. 70 Category Graphic resolution (dpi) Rotation Settings Adjust Bar Width* Upper Line: Minimum Module [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Plain 360 180 Normal, Rotate180 Available 4 dots - - Rotate90, Rotate270 6 dots - - 360 360 Normal, Rotate180 4 dots - - Rotate90, Rotate270 6 dots - - 720 360 Rotate90, Rotate270 4 dots - - 6 dots - -