Up to 30 barcode fonts can be registered. The barcode font setting can be overwritten by clicking [ Save ] after selecting the font name from the font list and changing the setting. The barcode font setting can be deleted by clicking [ Delete ] after selecting the font name from the font list. Execute a test print according to the setting by clicking [ Print ] after inputting the text in the box. Specifying the barcode data Specify the barcode data by referring to the following descriptions. About the composite symbol: The composite component type is selected automatically depending on the digit number of the data. About the HRI character:
When the total width of the HRI character is larger than that of the barcode, the HRI character width is set as the barcode width. UPC-A ❏ Normal • Specify the data of 11 to 12 digits. • The first digit is an unchecked number system character. • For data of 12 digits, the 12th digit is regarded as a check digit, but not proved. • For data of 11 digits, a check digit is automatically added. ❏ Composite (difference from Normal) • For data of 12 digits, the 12th digit is ignored, and a check digit is automatically added. UPC-E ❏ Normal • Specify the data of 6 to 8, or 11 to 12 digits. • For data of 6 digits, the specified data is not changed, and a check digit is automatically added.
• For data of 7 digits, the 2nd to 7th digits become the data characters, and a check digit is automatically added. 72 Composite Component Type Encodable Digit Number CC-A 1 ~ 56 digits CC-B 1 ~ 338 digits