GS1 DataBar Omnidirectional/GS1 DataBar Truncated/GS1 DataBar Limited ❏ The first application identifier ‘01’ is not included in the data. ❏ When printing the HRI characters, the first application identifier ‘01’ is printed as ‘(01)’ before the packing identification code. ❏ A check digit need not to be attached to the barcode data. ❏ When printing the HRI character, a check digit is printed after a product code. ❏ For GS1 DataBar Limited, specify ‘0’ or ‘1’ for the first digit. GS1 DataBar Expanded ❏ Specify the data of 2 to 255 digits. ❏ ‘()’ is the delimiter for the application identifiers.
(printed as the HRI character, but not encoded.) ❏ Be sure to include all the application identifiers in the data. ❏ When the first data is ‘01’ after deleting application identifiers, left and right parenthesis, and ‘*’ from the specified data, the 14th digit from the next of ‘01’ is checked as a check digit. When it is not correct, an error occurs. ❏ When the next data of ‘01’ is fewer than 14 digits, a check digit is not checked. (The check digit is not automatically calculated, nor replaced with ‘*.’ When ‘*’ is specified, ‘*’ is ignored, and the rest of the data is shifted by 1 digit.) ❏ Specify the special character using the following format.
76 Control Character ASCII HRI Character FNC1 {1 Space is printed. Left parenthesis for the application identifier ( '(‘ is printed. Right parenthesis for the application identifier ) ‘)’ is printed. ‘*’ {* Error Skipped character * Not printed.