Self-test 1 Check the following points before performing the self-test. • The roll paper is correctly set. • The roll paper cover is closed. 2 Press the self-test button. There are two types of self-test, as described below. • Self-test without notification Press the self-test button at the back of the printer for less than 5 seconds. • Self-test with notification Press the self-test button at the back of the printer for 5 seconds or longer continuously. The self-test result is printed. T M - C 7 1 0 • MAC address * E P S O N N e t w o r k S h e e t * M A C 0 0 : 0 0 : 4 8 : C D : 0 B : 3 B I P 1 9 2 . 1 6 8 . 1 9 2 .
1 6 8 L N 1 2 3 I P F i l t e r D i s a b l e • IP address • Lane number • IP filtering function status * P r i n t e r S h e e t * Z T C 0 7 5 0 8 Q P 0 0 1 6 0 0 J K 2 G 0 0 0 0 0 1 • Firmware version • Printer serial number • Nozzle check pattern ---------- Cut ------------- When the self-test with notification is performed, the fact that the self-test was performed can be detected from the host PC. When the host PC detects the self-test information, the printer prints a test coupon including the host PC information. The user can verify the host PC system and communication functions. 94 Procedure for the Self-test