User's Manual: Epson TM-H5000II — Printer Setup & DIP Switch Settings (EN)

User’s Manual

User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 401406403

Стр. 1

User’s Manual

Printer Parts 3 roll paper cover ERROR PAPER OUT POWER 2 front cover FEED l POWER FORWARD 1 on/off switch REVERSE RELEASE ERROR RELEASE SLIP DIP Switch Tables Serial Parallel OFF Offline or buffer full Not connected Print density Disabled Disabled Serial transmission speed 2400 bps 4800 bps 9600 bps 19200 bps utter c r tch over 5 roll pa contr 6 slip pape control p SW Function ON OF 1-1 Data receive error Ignored Prin 1-2 Receive buffer 45 bytes 4 K 1-3 Handshaking XON/XOFF DT 1-4 Data word length 7 bits 8 b 1-5 Parity check En 1-6 Parity selection Eve 1-7 1-8 SW Function ON OFF 1-1 Auto line feed Enabled Disabled 1-2 Receive buffer 45 bytes 4 KB 1-3 ~ 1-8 Undefined — — SW Function ON OFF 2-1 Handshaking Buffer full Offline or buffer full 2-2 Reserved Do not change.

Fixed to OFF. 2-3, 2-4 Print density See “Print density” table. 2-5 ~ 2-7 Reserved. Fixed to OFF. Do not change. 2-8 Pin 31 reset Fixed to ON. SW Function ON 2-1 Handshaking Buffer full 2-2 Customer display Connected 2-3, 2-4 Print density 2-5, 2-6 2-7 Pin 6 reset Enabled 2-8 Pin 25 reset Enabled 2-3 2-4 Density ON ON Low power mode OFF OFF 1 (normal) ON OFF 2 OFF ON 3 (dark) 1-7 1-8 Sp ON ON 24 OFF ON 48 ON OFF 96 OFF OFF 19

Стр. 2

User’s Manual

English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

EPSON is a registered trademark of Seiko Epson Corporation in Japan and other countries/regions. NOTICE: The contents of this manual are subject to change without notice. Copyright © 1996, 1997, 1998, 2001 by Seiko Epson Corporation, Nagano, Japan. Standards and Approvals The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson power supplies.) Europe: CE marking North America: FCC/ICES-003 Class A Oceania: AS/NZS CISPR22 Class A FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. For Canadian Users WARNING This is a Class A product.

In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. CE Marking The printer conforms to the following Directives and Norms: Directive 2004/108/EC This Class A digital apparatus complies with Canadian ICES-003.

IEC 61000-4-2 IEC 61000-4-6 IEC 61000-4-3 IEC 61000-4-8 IEC 61000-4-4 IEC 61000-4-11 IEC 61000-4-5 Directive 90/384/EEC EN 55022 Class A EN 55024 Restriction of Use EN 45501 When this product is used for applications requiring high reliability/safety, such as transportation devices related to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safety devices, etc.; or functional/precision devices, etc.; you should use this product only after giving consideration to including fail-safes and redundancies into your design to maintain TM-H5000II User’s Manual 3

Стр. 3

User’s Manual

English safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety, such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, etc., please make your own judgment on this product’s suitability after a full evaluation. Safety Precautions This section presents important information intended to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location. WARNING: Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise.

Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous. Never disassemble or modify this product. Tampering with this product may result in injury or fire. Be sure to use the specified power source. Connection to an improper power source may cause fire. Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. If water or other liquid spills into this equipment, unplug the power cord immediately, and then contact your dealer or a Seiko Epson service center for advice.

Continued usage may lead to fire. Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. CAUTION: Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage and burning. Be sure to set this equipment on a firm, stable, horizontal surface. The product may break or cause injury if it falls. Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage or fire. Do not place heavy objects on top of this product. Never stand or lean on this product. Equipment may fall or collapse, causing breakage and possible injury.

4 TM-H5000II User’s Manual

Стр. 4