English 3. Lightly wipe the glass shown in the picture with a soft, dry cloth. CAUTION: When cleaning, never apply any liquid directly to the glass of the scanner. Do not use synthetic detergent, benzine, water, or other liquid for cleaning. Doing so may result in a stain. When unintended black lines appear in scanned image, the glass of the scanner may be smeared with oil, grease, or other unremovable substance. In such case, wipe the glass with a cloth lightly dipped in alcohol, and after that, wipe off all remaining alcohol. Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently damage the mechanism and circuitry. 4.
Press the section marked “Close” indicated by the circle in the picture below; then push in the scanner unit until it clicks in place. Note: If the scanner unit is not pushed in properly, a cover open error occurs, and the ERROR LED comes on. 5. To attach the scanner cover, push it down into the connecting part firmly until it clicks in place. 20 TM-J9000/J9100 User’s Manual