English Part Names Scanner Roll paper section Card entrance Feeder Control panel Roll paper cover open button Cartridge cover tab Power switch Validation section Locking wire saddle DIP switch 2 Power supply connector USB connector Note: DIP Switch 2 is intended for switching the interface. Do not change the position of the DIP switch 2 except when changing the interface. Hooking the USB cable on the locking wire saddle prevents the cable from falling off. Attaching the Feeder Guide Feeding paper using the included feeder guide allows you to insert a check straight. Also, the auto sheet feeder (ASF) model printers can feed up to 25 checks without manual feeding.
Follow these steps to attach the feeder guide. 1. Hold the edge of the feeder guide carefully. TM-J9000/J9100 User’s Manual 5