English 3. Position the pocket as shown in the picture below, and push it into the printer until it clicks in place. ➀ ➁ Insert the hooks on the four corners of the pocket into the holes indicated with the circles, and move the pocket into place. 4. Unfold the stopper of the pocket as shown in the following picture. Stopper Note: To remove the pocket, place the printer vertically as shown in the picture below; then while pushing up the lever on the bottom of the pocket, slightly push the pocket backward, and then pull it up. ➁ ➀ Push up the lever. TM-J9000/J9100 User’s Manual 7