Chapter 4 Advanced Usage 4 Connect the iOS device to the printer using a Lightning to USB cable. Make sure to connect the cable to the USB-A Device Charging connector (white connector). 5 On the iOS device, tap [Settings] - [Ethernet], and then check that an IP address has been set. • If [Ethernet] does not appear in [Settings] of the iOS device, the tethering function of the printer might have been disabled. See "Enabling the Tethering Function" on page 108 to enable the tethering. • If a DHCP server is not used in the network, set the IP address and subnet mask manually. • To print from the iOS device, select one of the interfaces; USB or network, in the application. 110