Chapter 2 Setup Setup using a Smart Device connected using SimpleAP Prepare the following items. • Smart device: iOS 12 or later/Android 8 or later • Setup utility: Epson TM Utility 1 Connect the wireless LAN unit to the printer. 2 Turn on the smart device. 3 Start the printer in the SimpleAP mode. The printer prints SSID and QR code. "SimpleAP mode" on page 52 4 Start Epson TM Utility. 5 Run [Wi-Fi Setup Wizard]. 6 Following the on-screen instructions, scan the printed QR code and connect the printer with SimpleAP. 7 Configure the network settings following the on-screen instructions. 8 When the settings are complete, exit Epson TM Utility. 9 Turn off the printer.
Wireless network settings of the printer is completed. 57