Chapter 4 Advanced Usage Reduction ratio of character height • Disabled (initial setting) • 25% reduction of inner spacing • 50% reduction of inner spacing • 75% reduction of inner spacing • 75% reduction of inner spacing and shrinking the character height • 0 dots for inner spacing and shrinking the character height • No reduction is applied to blank dot lines that exist in a graphic data. • Reduced barcodes are not guaranteed to be correctly scanned. Make sure to check whether they are properly read by a barcode reader that is actually used.
Font A Replacement • Does not replace (initial setting) • Font B • Special Font A • Special Font B Font B Replacement • Does not replace (initial setting) • Font A • Special Font A • Special Font B Buzzer • For information about how to connect the optional external buzzer, see "Connecting the Optional External Buzzer" on page 42 . • When using a cash drawer, make sure to set “Select Buzzer” to “Disabled” or “Built-in buzzer”. • When using the built-in buzzer and cash drawer, set each to pin 2 (pulse 1) or pin 5 (pulse 2) of the drawer kick connector. Select Buzzer • Built-in buzzer (initial setting) • External buzzer • Disabled When an error occurs:
frequency • Continues to sound (initial setting) • Does not sound • 1 time 86