Chapter 3 Advanced Usage Print speed Selectable from levels 1 to 10 (Slow ~ Fast) (initial setting: level 10) Depending on print conditions, such as print duty, print head temperature, and data transmission speed, print speed is automatically adjusted, which may cause white lines due to intermittent print (the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower. Interface mode Selectable from: automatic selection, fixed to wireless LAN/ Bluetooth interface, or fixed to built-in USB. The TM-P80 has dual interfaces: a built-in USB interface and another interface selected by the customer, wireless LAN or Bluetooth .
The tables below describe the modes you can set for the printer to control the dual interfaces. Automatic selection: When the USB cable is connected with a host PC, the USB interface is preferentially selected. Otherwise, the wireless LAN/ Bluetooth interface is selected. Once the interface is selected, the selection is enabled until the power is turned off or the USB cable is disconnected. For Wi-Fi models 3 For Bluetooth models Column emulation mode 48 column mode (initial setting) 42 column mode For detailed information, see "Printing Specifications" on page 89 and "Character Specifications" on page 91 .
51 Interface mode Wireless LAN Built-in USB Automatic selection (initial setting) Available Available Fixed to Wireless LAN Available Not available Fixed to built-in USB Not available Available Interface mode Bluetooth Built-in USB Automatic selection (initial setting) Available Available Fixed to Bluetooth Available Not available Fixed to built-in USB Not available Available