NV graphics information print mode Prints the following NV graphic information registered to the printers. NV graphics capacity NV graphics usage capacity NV graphics free capacity NV graphics registration Key code for each data, number of X direction dots, number of Y direction dots NV graphics data For details on NV graphics, see "NV Graphics Memory" on page 28 . Follow the steps below. 1 After running a self test, hold down the FEED button for at least one second, and then select the Mode selection. The Mode selection guidance is printed, and the Power LED flashes.
2 After briefly (less than one second) pressing the FEED button once, hold it down for at least one second, to print the NV graphics information. After information printing, the Mode selection guidance is printed again. 3 To finish, turn off the power, or select “Exit and Reboot Printer”. Set the printer's memory switch (customized value).
Print density Command execution during offline Automatic paper reduction Interface selection Transmission of status notice Buzzer control USB communications settings Automatic power off setting Print speed Paper position immediately after specific state NV memory capacity Column emulation settings For details on the memory switch (customized value), see "Software Settings" on page 49 . 58 Software settings mode