Printable Area Printing is automatically performed in one to four-part energization depending on the printing conditions. During printing with two to four-part energization, a misalignment (horizontal ruled line shift) of 1/4 to 1/2 dot might occur in the paper feeding direction due to segmented printing. Dot 1 Manualcutter model 48 column mode (initial setting) 42 column mode 94 79.5 0.5 mm 0.125 mm Dot 576 72 mm (Dot 1 - 576) (3.65 mm) (3.65 mm) 0.125 mm Dot 576 72 mm (Dot 1 - 576) (3.65 mm) (3.65 mm) 79.5 0.5 mm 16 dots 14 dots 68.3 mm (Dot 1 - 546) (3.65 mm) (3.65 mm) 16 dots 14 dots 68.3 mm (Dot 1 - 546) (3.65 mm) (3.65 mm) (3.65 mm) (3.65 mm)