Electrical Characteristics Be sure to install the battery in the printer. The printer does not operate with the AC adapter only. Be sure to use the optional PS-11 as the power supply unit. * This is the input voltage required to charge the battery with the printer. Above continuous operating times will vary depending on changes in the use environment or condition. 98 Dedicated battery Model: D141A (OT-BY60II) Model: D161A Rated voltage: DC 7.4 V Capacity: 2000 mAh Rated voltage: DC 7.2 V Capacity: Typ. 1950 mAh, Min. 1850 mAh Power supply Input: DC24 V/Max. 1.5 A or DC12 V/Max. 1.0 A* Dedicated AC adapter (PS-11) Output: DC 24 V/Max. 1.5 A Input:
AC 100 V to 240 V Consumption During standby: 0.3 W/230 V, when using PS-11 During charging: 15 W/230 V, when using PS-11 Continuous operating Wi-Fi models time Bluetooth models Manualcutter model: Power save mode enabled: Approx. 25 hours Power save mode disabled: Approx. 14 hours Autocutter model: Power save mode enabled: Approx. 25 hours Power save mode disabled: Approx. 14 hours Manualcutter model: Approx. 46 hours Autocutter model: Approx. 33 hours