Important Notes on Processing Documents Use paper that meets the scanner specification. (See "Paper Specifications" on page 33 .) Do not use copy paper or other multi-ply paper. Make sure that the documents have no curl, bending (especially on the corners), warpage, or wrinkles. Do not use checks with paper clips, staples, adhesive tape, or other foreign materials attached. Be sure to let documents go as soon as the scanner starts feeding. Otherwise, there may be a paper skew, paper jam, or MICR reading error. Do not open the covers while processing is in progress. Inserting Checks You can put up to 100 documents in the ASF to be fed automatically.
1 Align the documents neatly on the bottom-right corner as shown in the picture below so that they will be fed one by one. If the documents are inserted without being aligned, they may not be fed at all, or a paper jam or incorrect feeding of multiple documents may result. 1234780 1234567890 52