For All Models LED indicators Franker cover Franker cover open lever Power switch Power switch cover Power Switch Turns the scanner on or off. Before turning on the scanner, be sure to check that the AC adapter is connected to the power supply. CAUTION Install the power switch cover that comes with the TM-S1000 onto the scanner to prevent inadvertent changing of the power switch, to prevent tampering, and to improve the appearance of the scanner. To reset the scanner when the power switch cover is installed, insert a long, thin object (such as the end of a paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord immediately. Continued use may cause fire or shock. WARNING 16 Power Switch Cover