Chapter 5 Handling the Product Handling the Product This chapter describes the basic handling procedures for the product. Turning On/Off This section describes how to turn the product on/off. 5 59 Turning the Power On Hold down the (POWER) button for at least 1 second until the (POWER) LED turns on. (POWER) button Turning the Power Off Hold down the (POWER) button for at least 3 second until the (POWER) LED turns off. To turn off power without using the (POWER) button, send the command that executes the power of f sequence. • Do not remove and insert the power plug from/to the outlet while the power of the product is i n the on state. Doing so may cause electric shock or fire.
• Turning off the product by performing a (POWER) button operation or by sending a com- CAUTION mand causes the ink head to be capped automatically to prevent the ink from drying. If you d o not plan to use the product after installing an ink cartridge, be sure to use either of the methods above to turn off power. Do not pull out the power plug or turn off the breaker while the powe r is on.