Pull out the pocket guide to match the length of the cut sheets being used. Turn the product on/off. ( U “Turning On/Off” on page 67 ) To read a magnetic strip card, insert the card and slide it. ( U “Magnetic Stripe Card Processing” on page 75 ) Open this cover if cut sheets become jammed. ( U “Opening the MICR Cover, Back Cover, and Scanner Cover” on page 69 , “Cut Sheet Jam” ) Open this cover to load or replace the roll paper. ( U “Loading Roll Paper” on page 40 , “Replacing Roll Paper” ) This cutter is for manually cutting roll paper. 16 6 ASF guide 7 (POWER) button 8 MSR (Magnetic Stripe Reader) 9 MICR cover 10 Roll paper cover 11 Manual cutter