Self-Test Printing on Cut Sheets When test printing on cut sheets, use the included cut sheet paper or cut sheets with dimensions of at least 70 mm wide by 152 mm long. 1 Turn off the product and confirm that all covers are closed. 2 While holding down Button 1, press the (POWER) button to turn on the product. ON + 3 Load three cut sheets into the ASF. ( U “Loading Cut Sheets” on page 72 ) Test printing begins. Printing is complete when “*** completed ***” is printed. • Self-test printing uses three cut sheets. The product stands by for insertion of cut sheets until printing is complete. • If the check doesn’t feed correctly, perform the self-test using 3 of the provided new cut sheets.
If the printer has not been used for three months or more, please perform this self-test print pro- cedure, and repeat until the unit feeds correctly. 56