Chapter 5 Handling the Product 3 Load the paper and remove your hand. After paper ejection is complete, remove it by hand. Touching the paper or opening the cover while processing is in progress creates the risk of paper jams or unexpected injury. CAUTION Removing Cut Sheets After cut sheets are ejected into the pocket, remove them. • Each of the pockets can store the number of sheets shown below. To prevent paper jams, do not allow the number of sheets in a pocket to exceed the specified value. • Main pocket: 100 • Sub-pocket: 50 • Paper feed speed is lower in the case of 300 dpi color image acquisition or simultaneous acquisi- tion of a color image and IR image.
Depending on the paper type and conditions, cut sheets may curl in the pocket at this time. Because of this, it is recommended that cut sheets be removed after about 25 sheets are accumulated in the pocket. 5 73