Chapter 6 Replacement of the TM-T82 Replacement of the TM-T82 The TM-T100 is designed so that it can smoothly replace the TM-T82. This chapter describes precautions for the replacement. Compatibility Printing The printing and character specifications are the same as those of the TM-T82. Without special configurations, the TM-T100 prints the same results as the TM-T82 prints. Print Speed The TM-T100 prints faster than the TM-T82. Depending on print conditions such as print duty, print head temperature, and data transmission speed, print speed is automatically adjusted.
Cutting Method TM-T100 uses the same partial cutting method as the TM-T82 uses, but the point left uncut has been changed from one point in the left edge to one point at the center. Logo Registration The TM-T100 can register logos in the NV memory (NVRAM) with the Setup Utilities. Driver Compatibility You can operate the TM-T100 with a driver for the TM-T82. USB Low Power Consumption Mode With the TM-T100, you can enable the USB low power consumption mode using the Epson TM-T100 Utility. 56 TM-T100 TM-T82 Maximum print speed Up to 200 mm/s Up to 150 mm/s Print speed setting Level 1 to 13 Level 1 to 13