Appendix Appendix Product Specifications *1: According to our operation conditions 59 Printing method Thermal line printing Paper feed speed Approx. 200 mm/s {approx. 7.88"/s} (continuous paper feeding with the Feed button) Cutting Method Partial cut (cutting with one point at center left uncut) Interface USB: USB 2.0 Full-speed (12 Mbps) Ethernet: 10BASE-T/100BASE-TX Serial: RS-232 Buffers Receive buffer Downloaded buffer NV graphics data Downloaded graphics data 4 KB/45 bytes (selectable using the memory switches) Approx.
12 KB (both for user-defined characters and downloaded images) 256 KB 208 KB Barcode/two-dimensional symbol/ composite symbol printing UPC-A, UPC-E, JAN 8 (EAN 8), JAN 13 (EAN 13), CODE 39, ITF, CODABAR (NW-7), CODE 93, CODE 128, GS1-128, GS1 DataBar Omnidirectional, GS1 DataBar Truncated, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, GS1 DataBar Expanded Stacked, PDF417, QR CODE, MaxiCode, Composite Symbology Drawer kick connector drive function 2 drives Power supply Rated voltage: 100 to 240VAC 50/60Hz, Rated current: 1.0 A AC power consumption Operating (100 to 230 V/50 to 60 Hz)*1 Standby Approx. 27.8 W Approx.
0.96 W Life*2 Mechanism Thermal head Autocutter 15 million lines 100 km 1,500,000 cuts MTBF*3 360,000 hours MCBF*4 60,000,000 lines Temperature/humidity Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH Storage: -10 to 50°C {14 to 122°F}, 10 to 90% RH Overall dimensions (H × W × D) 140 × 149 × 192 mm {5.51 × 5.87 × 7.56"} Mass Approx. 1.5 kg {3.31 lb} (roll paper excluded)