Appendix Printing Specifications dpi: dots per inch *: The maximum is 63 mm/s {2.48"/s} when printing ladder barcodes or two-dimensional symbols. Printing speed may be slower, depending on such items as the data transmission speed.
61 Printing method Thermal line printing Paper feed direction Unidirectional with friction feed Dot density 203 × 203 dpi Printing width Standard mode (default setting) 42 column mode 72.0 mm (2.83"), 576 dots 68 mm (2.69"), 546 dots Characters per line Standard mode Font A (12 x 24) (default setting) Font B (9 x 17) Kanji font A (24 x 24) 42 column Font A (13 x 24) mode Font B (9 x 17) Kanji font A (26 x 24) 48 64 24 42 60 21 Character spacing Standard mode Font A (12 x 24) (default setting) Font B (9 x 17) Kanji font A (24 x 24) 42 column Font A (13 x 24) mode Font B (9 x 17) Kanji font A (26 x 24) 0.25 mm {0.0098"} 2 dots 0.25 mm {0.0098"} 2 dots 0.00 mm 0.38 mm {0.015"} (3 dots) 0.25 mm {0.0098"} (2 dots) 0.25 mm {0.0098"} (2 dots) Line spacing 3.75 mm {0.15"} (default setting, programmable by command) Maximum print speed 200 mm/s {7.88"/s}*