Hanging the Printer on a Wall To hang the printer on the wall, follow the steps below. • To fix the printer securely, install the wall hanging bracket on a wall made of wood, concrete, or metal. The thickness of the wall should be 10 mm {0.4"} or more. • Be sure to use metallic screws. • The screws on the wall side must have a pull-out strength of 150 N (15.3 kgf) or more. 1 Attach the included control panel label for vertical installation on the roll paper cover. Control panel label for vertical installation 2 Install 2 screws (screw diameter: 4 mm {0.16"}, head diameter: 7 to 9 mm {0.28 to 0.35"}) in the wall at an interval of 80 mm {3.15"}.
Make sure the length of the screw's body in the wall is 10 mm {0.39"} or more, and the length outside the wall is 3 to 4 mm {0.12 to 0.16"}. R 3- 4 mm 80 mm 4 mm 7- 9 mm 10 mm or more 34