Install the power switch cover that comes with the TM-T70 onto the printer to prevent inadvertent changing of the power switch, to prevent tampering, and to improve the appearance of the printer. To reset the printer when the power switch cover is installed, insert a long, thin object (such as the end of a paper clip) into the hole in the power switch cover and press the power switch. If an accident occurs with the power switch cover attached, unplug the power cord immediately. Continued use may cause fire or shock. WARNING Control Panel FEED button PAPER OUT LED ERROR LED (POWER) LED FEED button Pressing this button once feeds the roll paper by one line.
Holding this button down feeds the roll paper continuously. LED PAPER OUT LED • Lights when there is no more roll paper or there is little remaining. • Flashes when a self-test is in progress. • Off when there is a sufficient amount of roll paper remaining. ERROR LED Lights or flashes when the printer is offline. • Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate that the printer is ready. 14 Power Switch Cover