Bluetooth Low Energy Technology Advertising When you connect the BT820 from Laird Connectivity to the USB A connector on the TM-T88VI and turn it on, the Bluetooth low energy technology Advertising Packet is transmitted. By default, the TM-T88VI transmits the packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by following the steps in "Changing the Bluetooth Low Energy Technology Advertising Packet" on page 145 . Glossary: Manufacturer: Laird Connectivity Model name: BT-820 For setting methods and settings, see the TM-T88VI Utility User's Manual.
When turning on the TM-T88VI, the Bluetooth adapter connected to the USB Type A connector is enabled. If you install the Bluetooth adapter after turning on the printer, this is not enabled. Bluetooth Low Energy Technology Advertising Packet Format In the TM-T88VI, the iBeacon format is used by default for the Bluetooth low energy technology Advertising Packet. The UUID for the T88VI is "fac1ba2f-61a2-4d83-9a8c-60087c232569". The user can edit the following specifications in the iBeacon format: UUID, Major number, Minor number, and Measured Power. 144 Introduction Term Description Bluetooth Low Energy Technology Advertising The name of this function.
Bluetooth Low Energy Technology Advertising Packet The data sent by this function from the printer. Bluetooth adapter The BT820 from Laird Connectivity A USB dongle to connect to the USB Type A connector. iBeacon The format stipulated by Apple for Bluetooth low energy technology Advertising Packets When using the default settings for the TM-T88VI (Bluetooth adapter installed in the printer and the printer is on), the Bluetooth low energy technology Advertising Packet is transmitted in iBeacon format. Dongle specifications Procedure