Chapter 1 Product Overview Connectors All connectors are located on the lower rear of the printer. • The installed interface varies depending on the model. • Do not insert a Type-B USB connector into the LAN connector or the drawer kick connector. If it is inserted, the connector, printer, and the system may malfunction. • If using the drawer kick connector and a serial/parallel connector simultaneously, we recommend using either of the cables below to prevent the cables from interfering with one another. * Flat-type drawer kick cable * Serial/parallel cable with a connector (from the tip to the screw) that is within 34 mm {1.34"}.
Within 34 mm {1.34"} 1 1 3 4 6 7 8 5 2 19 1 Dr awer kick connector Connects the cash drawer or the optional external buzzer. See "Connecting the Cash Drawer" on page 41, and "Connecting the Optional External Buzzer" on page 44. 2 Eth ernet connector Connects the 10BASE-T/100BASE-TX ethernet cable. 3 Se rial interface Connects the serial cable for connecting to a computer. 4 Pa rallel interface Connects the parallel cable for connecting to a computer. 5 US B Plus Power Interface Connects the USB Plus Power cable for connecting to a computer. 6 Po wer supply connector Connect the AC adapter. See "Connecting the AC adapter" on page 32.