Installing the Printer You can install this printer horizontally. With an optional hanging bracket (WH-10), you can also attach the printer to a wall. Important Notes on Horizontal Installation • The printer must be installed horizontally on a flat surface (not tilted). • Do not place the printer in dusty locations. • Do not catch cables or place foreign matter under the printer. Important Notes on Wall Hanging You need to perform the following tasks to install the printer on a wall. For more details, see the installation manual for the optional wall hanging bracket (WH-10).
• Installing the roll-paper stoppers • Changing the location of the roll paper near-end sensor • Attaching the connector cover • Attaching the wall hanging bracket (WH-10) For the other notes, see the installation manual for the optional wall hanging bracket (WH-10). • Be sure to attach the connector cover when you install the printer on a wall using the wall hanging bracket. • When installing on a wall using a wall mounting bracket, the status of the wireless signal for the wireless LAN unit may decline. In this situation, use an extension cable. 30